We present the list of all products of our company

Production of Company NETRAMM
1. Powders of metals:
• Aluminum
• Tin
• Zinc
• Copper
• Magnesium
• Alloys
• Nickel (PNE-1)
2. Granules of aluminum.
Grain size of 5-15 mm (GOST 295-98).
3. Installation for the production of aluminum granules.
• Weight of granules ... ... ... 5-15gr.
• Performance ... ... ... 300 kg / h.
• Ability to produce granules of high pure metals.
4. Plant for the centrifugal hydraulic atomization (CHA).
• Metals and alloys ... ... ... Pb, Mg, Al, Zn, FePC, FeB.
• Productivity, kg / hr ... ... ... 50-3000
• size of powders and granules, mm ... ... ... 0,2-3
5. Plant for the production of fine powders by centrifugal-pneumatic atomization (CPA).
• Metals ... ... ... Sn, Al, Zn, Cu
• Melting temperature, C ... ... ... not more than 1200
• median powder, um ... ... ... 8-20
• Performance atomization, kg / hour ... ... ... 30-50
6. Plants for the production of scaly form powders with an amorphous or microcrystalline structure.
• Metals ... ... ... Zn, Al, Cu, CoFeSiB, FeNdB and others.
• Productivity, kg / hour ... ... ... 30-50
• output fraction -350 +63 ... ... ... 75%
• thickness of the flakes, um ... ... ... 3-6мкм
• Bulk density, g/cm3 ... ... ... 0.3-0.6
7. Pastes:
• PSC-3 (SnCu3) - soldering copper alloys, carbon and stainless steels.
• PSP-61 (Sn61Pb) - soldering electronics.
• PSP-50 (Sn50Pb) - brazing radiators.
• ASA - brazing alloys.
8. The NETRAMM company is the exclusive dealer of atomizing equipment of company ASL (www.atomising.co.uk) in Russia and near abroad.

We have developed the project of plant for the production of powders and granules of refractory metals and alloys (Ti, tungsten carbide, etc.).

Atomizing plant with centrifugal method. The plant is intended for the production of powders and granules by centrifugal atomization from rotating tundish. Plant capacity 100 kg per hour.

We have developed the laboratory equipment for making prototypes of powders of various metals and alloys.

We have developed the laboratory equipment for making prototypes of powders of various metals and alloys.

Plant for production of powders of soda ash

Our company received an order from a foreign company Soda Ash Tech on preliminary research on establishment of plant for the production of soda ash (Na2CO3) by centrifugal atomization of melt with a capacity of 1200 kg/h and particle size of 200 microns.

Our company together with the British company supplies equipment for the production of aluminum granules of 5-15 mm with a capacity of 1000 kg / h

Our company together with the British company supplies equipment for the production of aluminum granules of 5-15 mm with a capacity of 1000 kg / h

We carry solder pastes

We carry solder paste NETRAMM-05 (Sn-3% Cu) for electrical fitting and soldering. Produced supply solder paste Sn18%-Pb-Sb0.5% for cars body repair work.

We have developed the project of for the production of powders of steels and alloys

We have developed the project of for the production of powders of steels and alloys by centrifugal atomization of the melt. Plant capacity of 1000 kg / hour, median - 30 microns, the oxygen content of 0,05%.

We have developed the project of the plant for production rapidly quenched powders of BiTe, SnBiCd, AgPb and others.

Our company has developed the project of the plant for production of powders of silver, gold and alloys with size of the particles 10-80 microns and 30 kg volume melting. Plant can be used for production of powders of copper, bronze, brass and others alloys.

Our graduates have won 2 competitions for young scientists with a prize fund:
- Polzunov grant
- a contest MISIS "Creation and development of new high-tech projects"